clorEP

Vacuum Gas
Dosing Systems


Gas Dosing

Transport, handling and safe storage of chlorine or ammonia gas for disinfection of the water is a challenge for engineering systems. This is the reason why the operating principle in vacuum is being used in dispensing systems for so long ago. The pressure of the chlorine gas is reduced to the vacuum. This method successfully avoids gas leakage. In the event of a pipe breakage, no gas can escape, only ambient air is drawn, removing the risk of personal or environmental damage.

Features and benefits of our VACCUPERM product range:

  • Safe and easy use
  • Precise regulation and dosing of gas
  • All the parts in contact with the media are made of corrosion-proof materials
  • Large variety of models and extensive possibilities of combination
  • Easy installation
  • Low operating costs
  • Approved disinfection method complying with most drinking water regulations

Vacuum chlorine gas dosing systems are composed of two principal components: the vacuum regulator and the dosing regulator. The vacuum regulator is a pressure reducing valve, which reduces the overpressure from the chlorine tank side to the negative pressure on the vacuum side. The valve opens, when a sufficient vacuum is present on the outlet side. Vacuum regulators with pressure gauge and a liquid trap are available for more safety.

The chlorine gas volume flow is adjusted with the dosing regulator. This can be effected manually or automatically via motor control.

Product range by Gas Dosing

VGB-103
VACCUPERM VGB-103

Compact dosing unit

Vacuum regulator and dosing regulator in a single unit for direct mounting on a chlorine gas cylinder.

Available in 5 capacity ranges up to 2000 g/h.

VACCUPERM VGA-111
VACCUPERM VGA-111

Vacuum regulator up to 4000 g/h

Vacuum controller that incorporates an inlet valve and a gas filter, as well as a safety valve against overpressures.

Can install directly on the bottle of chlorine or a gas manifold. It exists the option to include a pressure gauge with minimum pressure contact. For those cases which the installation has to be done on a collector, we offer a vacuum regulator that incorporates a splitter and a liquid trap.

Regulation capacity up to 4000 g/h.

VACCUPERM VGA-113
VACCUPERM VGA-113

Gas Dosing Unit up to 4000 g/h

Gas dispenser for assembly to wall, incorporates a measurement device and a valve of gas flow adjustment.

The dosage unit can be supplied with a servomotor for an automatic dosage adjustment. The servomotor has two options: potentiometer inverter or analogic control (4-20 mA).

The equipment is available until 4000 g/h.

VACCUPERM VGA-146
VACCUPERM VGA-146

Vaccum Regulator up 10 kg/h

Vacuum regulator for assembly to wall, directly in bottle / gas cylinder or gas collectors line.

It incorporates an inlet valve and another safety valve for overpressure. Also it incorporates a pitfall of liquid and an internal filter.

Its regulation capacity it is up 10 kg/h.

VACCUPERM VGA-117
VACCUPERM VGA-117

Gas Dosing Unit up to 10 kg/h

Gas dispenser for assembly to wall that incorporates a device of measurement and a valve of adjustment of gas flow.

The servomotor has two options: with potentiometer inverter or analogical control (4-20 mA).

The equipment is available up to 10kg/h.

VACCUPERM VGS-141/143/145
VACCUPERM VGS-141/143/145

Gas dosing system up to 200 kg/h

Vaccuperm VGS incorporates the last generation sensors and electronic microprocessors to control flow dosage.

Several sensors connected to a PLC offer a big variety of control possibilities and error detection that results in safety increasing during the whole process.

  • Pressure sensors for more safety
  • Precise measurement system for rotameter
  • System with direct proportional control
  • Automation of dispensing process
  • Ergonomic design for easy maintenance
  • Excellent precision and stability
VACCUPERM VGS-147/148
VACCUPERM VGS-147/148

Vaccum Regulator up to 200 kg/h

Regulator vacuum gas to install on gas manifold.

Includes a safety valve and a trap of liquid.

Equipment is available up to a capacity of 200 kg/h.

VACCUPERM RV-171 & RV-171W
VACCUPERM RV-171 & RV-171W

Evaporators for liquefied gases (chlorine and ammonia)

Automatic evaporator transforms liquefied gas taken from the storage tank by using heat exchange.

The heat transfer medium can be water with anti-corrosive additives and antifreeze or oil.

Capacity up to 200 kg/h of chlorine or ammonia 42 kg/h.

Use of cookies

We use third party cookies to customize the content and monitoring the website traffic. You could change the configuration or read more about cookies here: Cookies.

ACEPTAR
Aviso de cookies