Chlorine Analyzer CLP600A
Multi-parametric chlorine analyzer for chlorine, pH, temperature and specific conductivity for the control of water quality in dosing and disinfection processes in drinking water installations. The measuring range for the equipment is 0-2 mg/l for the CLP163A probe and 0-10 mg/l for the CLP163B probe, with a maximum working pressure of 1 bar.
The probes are equipped with compensation in temperature and pH.
The equipment has analog inputs and outputs:
- pH probe inlet.
- Chlorine probe inlet.
- Two outputs for temperature sensors.
- One 0-20 mA input.
- One input 0-10 V.
- Two outputs 0 / 4-20 mA.
It also has digital inputs and outputs:
- Four opto-coupled digital inputs.
- Two configurable relay outputs 1A.
- Two Configurable maximum 0.1A solid state relay outputs.
Communications are through an isolated RS485 port with polarization and fail safe via Modbus Rtu protocol.
Among other features, it comes equipped with a 5 “TFT resistive touch screen and four auxiliary membrane buttons for navigation, it has a datalogger function with a capacity of 64 Mbytes, a calendar clock with a time backup system for more than 5 years of lack of power. , possibility of reading data and configuration via Bluetooth device and the possibility of incorporating a conductivity sensor and a GSM modem.